Brilix THP 55 Installation And User Manual page 10

Swimming pool heat pump
Table of Contents

Advertisement

EN
6. 5 How to change parameter settings
1. In the standby mode, use buttons
for B-F.
2. Simultaneously, for fi ve seconds, press buttons
3. Change the parameter value until you hear a beep and until the parameter is indicated on the display as a
fl ashing value.
4. If no button is pressed on the control unit within fi ve seconds, the electronics will save the data
automatically and will return to the standby mode.
6. 6 How to set the clock
1. In the standby mode, press button
changed using buttons
2. Again, press button
buttons
or
3. To confi rm the time setting, press button
6. 7 How to set the switch-on and switch-off time using the timer
a) Press button
fl ashing.
b) Again, press button
be changed using buttons
c) Press button
light for the switch-on time of the timer will be illuminated.
d) To set the switch-off time of the timer, take the same steps. Instead of button
The green indicator light for the switch-off time of the timer will be illuminated.
Note: You can set both the switch-on and switch-off times of the timer, or only one.
6. 8 How to cancel / reset the timer function
For activation, press button
cancel / reset the timer function, press button
6. 9 Lock / Unlock the keyboard
When you have fi nished setting the parameters, pressing buttons
(until a beep is heard) will lock the keyboard. To unlock it, press these two buttons simultaneously for
other three seconds.
or
.
or
. The minute digits will start fl ashing to show that they can be changed using
.
to activate the timer switch-on time setting mode. The hour and minute digits will start
to activate clock setting. The hour digits will start fl ashing to show that they can
.
and
to confi rm the setting. The display will return to standby mode. The green indicator
or
to fi nd the parameter 0-A and the current measured values
to activate parameter setting.
and
. The hour digits will start fl ashing to show that they can be
.
. The appropriate indicator light will start fl ashing. To
.
10
use button
simultaneously for three seconds
and
.

Advertisement

Table of Contents
loading

Table of Contents