Available Accessories; Simulator Operation; What You See On-Screen - Humminbird ProAngler Operation Manual

AVAILABLE ACCESSORIES

Humminbird offers a wide assortment of accessories which complement and expand the
capability of your new ProAngler. These accessories are designed with the same high standards
and are backed by the same one-year warranty. The Humminbird Accessory catalog included
with your unit contains descriptions of the many accessories available and ordering information.
All Humminbird accessories are available through your full-service Humminbird dealer or factory
direct through our Toll-Free number listed on the back cover of this manual.
The ProAngler is completely automatic and easy to use. Simply press the POWER button and the
unit will locate and track the bottom from 2' to 600' changing ranges as necessary, display any
structure or suspended fish and work at speeds from 0 to over 70 mph.
If POWER is the only button you use, you will benefit from the advanced automatic bottom
tracking of the ProAngler. However, if you choose to experiment with the many features and
controls the ProAngler offers, you can customize the presentation of information to suit your
particular needs.

SIMULATOR OPERATION

The ProAngler contains a simulator which allows you to use the
unit as if you are on the water. The Simulator is invaluable for
learning how to operate the many features of the ProAngler. There
are two ways to enable the simulator: if the unit is powered off,
press and hold the POWER button for approximately 3 seconds
until a continuous chirp is heard. The Simulator can also be
enabled by selecting the Simulator option on the start-up screen
after you normally power-up the unit. When this screen is shown, simply press the DOWN
ARROW until "Simulator" is highlighted. When the screen times-out, the unit will be in simulator
mode.
When in simulator operation, the ProAngler responds to control inputs as if it is in actual
operation, so feel free to experiment with the many features and functions to customize the
ProAngler for your particular operation. To exit Simulator mode, power the unit off.

WHAT YOU SEE ON-SCREEN

Your ProAngler uses a 64 x 128 matrix SuperTwist LCD display. This type of display provides
outstanding viewability in all light conditions over a wide range of temperatures.
NOTE: When in simulator mode, the word "simulator" occasionally scrolls across the display
indicating that the information onscreen is not real sonar data.
At initial power-up, the depth range, sensitivity, and other user adjustments are set at their factory
settings. After the initial use, the ProAngler will remember the user settings. There are several
elements on-screen which are common to all modes of operation. The large digital number at the
lower left of the display is the depth of the water directly beneath the transducer location.
The initial screen layout takes one of two basic forms depending on whether the optional
Temp/Speed accessory is installed. Figure A shows the default view when the Temp/Speed
accessory is not installed. The digital depth number shows the depth of water directly beneath the
transducer location.