Getting Started; Led Status - UniTraQ UD-731N User Manual

6. Getting Started

There are only few simple steps that you need to follow before using your UD-731N:

Install the USB driver onto your laptop using the included CD-ROM .

Plug the GPS receiver into your laptop's USB port and assign the COM port. From
within your mapping or navigation software (including the supplied GPS
Application utility), you will need to manually configure the COM port that was
assigned to the UD-731N GPS receiver by operation system so that proper
communication between the GPS receiver and a mapping program can occur.
Most software requires that you manually configure the COM port setting for any
GPS device being used.

6.1 LED Status

The LED flash status:
RED LED :
1. Continue ON: GPS acquisition
2. 900ms on/ 100ms off : GPS tracking
GREEN LED :
Continue ON: while USB dongle plug into PC
UniTraQ International Corp.
2011,01, Version 1.1
USB Dongle Series Model:UD-731N
6
RoHS compliance
.