Bar; 10.2 Emergency Monitor Tool - GNS 1800 Series User Manual

10. Emergency Monitor
10.2 Emergency Monitor Tool Bar
1
Toolbar Functions
1. Center – When the emergency message display window shows an emergency message, select the
desired message and click [Center] and the Polaris Center program will run, automatically connecting to
the DVR site where the emergency message came from.
2. Health - When the emergency message display window shows an emergency message, select the
desired message and click [Health] and the Health Monitor program will run, automatically connecting to
the DVR site where the emergency message came from.
3. Setup – Displays the Emergency Monitor 'Setup' window. Refer to page 147 for Emergency Monitor Setup
Functions
4. Exit - Depending on the settings this button will either close or minimize the Emergency Monitor program.
If the program is minimized an icon will be shown in the system tray.
5. Minimize - These buttons will minimize the Emergency Monitor program and display an icon in the
system tray.
6. Open (Restore) - When the Emergency Monitor program is minimized, double click the Emergency
Monitor icon in the system tray to restore the program and display the Emergency Monitor window. Also,
when the Emergency Monitor program receives an emergency messsage transmission from the site DVR,
the Emergency Monitor window will automatically restore.
146
2 3 4
5