Function Buttons - Honeywell CL25AE Owner's Manual

USE & OPERATION ENG

Function Buttons

Power
Press the POWER button to turn the unit on. The cooler will
start automatically at medium speed. After a few seconds the
POWER
speed will switch to low. To turn the unit off, press the button
again.
Speed
Press the 'SPEED' button repeatedly and the speed will
change. The indicator light will show the selected speed. High
(Hi), Medium (Med), Low (Lo) & Sleep. Sleep setting is for
comfort during the night; cooler runs on high speed for 1 hr,
medium speed for 1 hr and then remains in low speed.
Mode
Press the 'MODE' button to switch the air cooler between
FAN and COOL modes.
Cool Mode: To begin cooling the desired area, press the
MODE button. The indicator light on COOL will come on and
the water pump will operate. You will feel the cooler air after
the honeycomb media is completely wet.
Fan Mode: To switch on the FAN only mode, press the MODE
button again and the indicator light on FAN will come on.
Timer
Press the ''TIMER'' button until the indicator light comes on to
your desired time. Once the set time has passed, the unit will
automatically shut off. The Timer function allows you to
program the unit for up to 7.5 hours of use.
9