USER TIPS What is Evaporative Cooling? Honeywell Evaporative Air Coolers are built to maximize energy efficiency and keep energy costs low. Warm air is drawn into the cooler and enters the Honeycomb Cooling Media. Water pumped from the water tank pours over the Honeycomb Cooling Media. As the warm air passes through the Honeycomb Cooling Media, the water absorbs the heat, naturally cooling and humidifying the air.
When used outdoors, insert the air cooler electrical plug into an IP44 compliant outdoor electrical outlet. Set the unit on a solid flat surface. IMPORTANT: Honeywell Outdoor Air Cooler models are designed to IPX4 product standards and not recommended to be placed outdoors during heavy rain or snow. SAFETY RULES WARNING—READ AND SAVE THE AIR COOLER GUIDE AND USER MANUAL...
Page 4
SAFETY RULES (CONTINUED) When using the COOL setting, make sure the water tank is at Max Indicator Level. Operating the unit on the COOL setting with an empty tank may result in damage to the water pump. DO NOT attempt to repair or adjust any electrical or mechanical functions of the Air Cooler, as this may void the warranty.
Page 5
Store this unit at room temperature in a dry location, away from direct sunlight and/or very hot, cold or damp environments. Carbon Dust Filter is available in specific models of Honeywell Air Coolers only. Check the User Manual for your model to see if it includes a Carbon Dust Filter.
TROUBLESHOOTING GUIDE Customer Service Center: See the last page of the User Manual to find the contact details for the Customer Service Center for your area. PROBLEM POSSIBLE CAUSE SOLUTION No discharge of air. Cord is not plugged in. Make sure power cord is plugged in and the switch is Power is not ON.