Function Buttons - Honeywell ES800I User Manual

USE & OPERATION (CONTINUED)

FUNCTION BUTTONS

POWER
Connect the power adapter to the cooler and to the electrical outlet. Press the
unit on. The cooler will start automatically at low speed. To turn the unit off, press the button again.
COOL or COOL/IONIZER*^
Press the COOL/ION
evaporative cooling. The water pump will operate and you will feel the cooler air after the Honeycomb
Cooling Media is completely wet.
WARNING: Please ensure sufficient water is in the water tank otherwise you may hear a Low Water
Alarm and the cooler will start in a Fan only mode without evaporative cooling.
An Ionizer helps to reduce particles in the air, thus promoting cleaner air quality. For models with
the Ionizer feature, pressing the
illuminated on the display. When
without evaporative cooling.
Press the / button until both
Both Cool and Ionizer can be activated imultaneously.
To turn off Cool and Ionizer, press the button until both
display screen, or press the button to turn off the unit.
SPEED
Press the button repeatedly to change the fan speed between
When AUTO is selected, the wind speed will gradually decrease and increase between the TurboBlast
and QuietSleep fan speeds.
QUIETSLEEP/ TURBOBLAST
Press the button to select either QuietSleep or TurboBlast modes. QuietSleep mode minimizes wind
speed for lower airflow. TurboBlast mode blasts wind at high speed for stronger airflow.
Note: In QuietSleep mode, all the display lights of the unit will be switched off. The lights can be
switched on by pressing any button.
TIMER
Press the button until the desired time duration setting is selected. When the set time has passed,
the unit will automatically turn off (unit remains in Standby mode until power cord is unplugged from
electrical socket). The TIMER function allows you to program the unit for up to 7.5 hours of use.
SWING
Press the button until the SWING
the display screen. The louvers will begin to move left to right automatically.
/
/ button until is
/ button again will activate the Ionizer and you will see
is not illuminated, the unit will function in a Fan only mode
and lights are illuminated together on the display screen.
/
indicator light is illuminated on
EN
illuminated on the display screen. This activates
and icons are switched off from the
-
*Applicable for models with this feature only.
^ Ionizer reduces particles in the air. This is not an air purifier.
3
button to turn the
- - .
LOUVER
MOVEMENT