Congratulations - Final Sound 600i User Manual

3. Congratulations

Congratulations on your purchase of a Final Sound flat-panel loudspeaker system.
You have invested in the finest instrument for audio reproduction available. The Final Sound product
line consists of front- and rear flat-panel loudspeakers, center loudspeakers and subwoofers.
The product line is based on a unique modular system. Final Sound offers you the possibility to start
buying a stereo system and easily extend this at any convenient time into a complete Final Sound
Home Theatre system. You can do this just by adding a center loudspeaker and/or another set of Final
Sound flat-panel loudspeakers.
The Final product line is designed to surpass the performance of other existing loudspeakers and
contains some of the most elegant and sophisticated designs ever used for music reproduction.
Our flat-panel loudspeakers are capable of producing very pure and accurate sound due to their ultra
low mass diaphragm. The Final Sound technology has evolved through many years of research and
development.
The Final Sound subwoofers are designed to match perfectly with the characteristics of the Final
Sound loudspeaker panels.
The Model F600i/1000i loudspeakers are designed for the use in a stereo setting, a virtual surround
setup or a so-called 5.1 home theatre configuration.
The Model F600i/1000i flat-panel loudspeakers are floor-standing loudspeakers.
600i/1000i-based stereo system
The Final Sound Model F600i/1000i stereo system consists of the following components:
2 F600i/1000i Final Sound flat-panel loudspeakers (left and right channel).
The F600i/1000i does not reproduce frequencies below 45/38Hz. Therefore it is very
important that a subwoofer, such as our S220 (purchased separately), that can
reproduce the lower frequencies be used.
600i/1000i-based home theatre system
It is simple to build a 600i/1000i-based home theatre system with the following components:
4 F600i/1000i Final Sound flat-panel loudspeakers (left, right and surround channels).
A Final Sound center panel (preferably a 600CP).
A subwoofer (S220).
600i/1000i-based virtual surround system
2 F600i/1000i Final Sound flat-panel loudspeakers (left and right).
A Final Sound virtual surround receiver or a receiver with virtual surround capability
(Dolby Virtual or SRS).
A subwoofer (S220).
Manual contents
This manual includes the instructions for the Final 600i/1000i and basic information about the Final
subwoofer.
Please read and follow these instructions carefully before you connect your Final Sound system to
your amplifier. These instructions are very important and will prevent you from experiencing any delay
or system damage, which might occur in a trial and error situation.
The Final Sound loudspeaker system consists of separate products, which can function individually or
perform as a complete system.
FINAL SOUND 600i/1000i Loudspeaker Manual vs. 1.4 -US-
.
c FS 2007RJ 5