Congratulations - Final Sound 90i User Manual

3. Congratulations

Congratulations on your purchase of a Final Sound flat-panel loudspeaker system.
You have invested in the finest instrument for audio reproduction available. The Final Sound product
line consists of front- and rear flat-panel loudspeakers, center loudspeakers and subwoofers.
The product line is based on a unique modular system. Final Sound offers you the possibility to start
buying a stereo system and easily extend this at any convenient time into a complete Final Sound
Home Theatre system. You can do this just by adding a center loudspeaker and/or another set of Final
Sound flat-panel loudspeakers.
The Final product line is designed to surpass the performance of other existing loudspeakers and
contains some of the most elegant and sophisticated designs ever used for music reproduction.
Our flat-panel loudspeakers are capable of producing very pure and accurate sound due to their ultra
low mass diaphragm. The Final Sound technology has evolved through many years of research and
development.
The Final Sound subwoofers are designed to match perfectly with the characteristics of the Final
Sound loudspeaker panels.
The Model F90i/150i loudspeakers are designed for the use in a stereo setting, a virtual surround
system or a so-called 5.1 home theatre configuration.
The Model F90i/150i flat-panel loudspeakers are floor-standing loudspeakers (using the optional floor
stand). However, the 90i/150i panel are also wall mountable.
90i/150i-based stereo system
The Final Sound Model F90i/150i stereo system consists of the following components:
Two F90i/150i Final Sound flat-panel loudspeakers (left and right channel).
The F90i/150i does not reproduce frequencies below 150/130Hz. Therefore it is very
important to combine with a subwoofer, such as our S110 or S220 (purchased
separately), that can reproduce the lower frequencies.
90i/150i-based home theatre (HT) system
Final Sound delivers a one box home theatre package. It is simple to build a 90i/150i-based home
theatre system with the following components:
Four F90i/150i Final Sound flat-panel loudspeakers (left, right and surround channels
in the HT package).
A Final Sound F90i/150i center panel (in the HT package).
A subwoofer (S110 or S220 to purchase separately).
90i/150i-based virtual surround system
Two F90i/150i Final Sound flat-panel loudspeakers (left and right).
A receiver or processor with virtual surround capability (SRS or Dolby Virtual) or a
Final Sound virtual surround receiver.
A subwoofer (S110 or S220).
Manual contents
This manual includes the instructions for the Final F90i/150i and basic information about the Final
subwoofer.
FINAL SOUND 90i/150i Loudspeaker Manual vs. 1.4 -US-
.
c FS 2007RJ 5