Final Sound 600i User Manual page 19

CONNECTING FOR HOME THEATRE
(Figure 2) If you have an AV-receiver for five, six or seven channel Dolby Digital/DTS
surround sound, you can use the 'standard' LFE connection method for subwoofers.
Connect the AV-receiver's LFE output to the subwoofer's left OR right LINE IN RCA
•
terminal.
Connect the five (six or seven) electrostatic panels to the five (six or seven) AV-
•
receiver's loudspeaker output terminals.
Adjust the 'loudspeaker size' in the receiver's menu to SMALL. This will activate the
•
receiver's LFE output. You can use this setting for a 600i running with a subwoofer.
For running a 1000i without subwoofer, 'LARGE' is the preferred setting.
If possible, adjust the crossover frequency between the panels and the subwoofer in
•
the menu. Choose the panel's lowest frequency to start.
You cannot use the subwoofer's special high pass filter facilities for driving the
•
electrostatic panels.
FINAL SOUND 600i/1000i Loudspeaker Manual vs. 1.4 -US-
.
c FS 2007RJ 19