Final 600i/1000i loudspeaker User Manual release 1.4 –US- Final Sound B.V. Eisenhowerweg 8D 5466AC Veghel The Netherlands http://www.finalsound.com Final Sound, L.L.C. 500 West Cummings Park, Suite 2500 Woburn, MA 01801 T:(781) 938-6416 F:(781) 938-6415 FINAL SOUND 600i/1000i Loudspeaker Manual vs. 1.4 -US-...
15) To reduce the risk of electric shock, do not remove the back panel of the subwoofer. There are no user-serviceable parts inside. Refer servicing to a qualified Final Sound dealer. Warning: High Voltage Inside. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Final panels are protected against accidental overload, but every protection circuit in a loudspeaker is a deliberately chosen compromise. Protecting against every possible fault condition is, from a music reproduction point of view, a serious trade off. FINAL SOUND 600i/1000i Loudspeaker Manual vs. 1.4 -US-...
The product line is based on a unique modular system. Final Sound offers you the possibility to start buying a stereo system and easily extend this at any convenient time into a complete Final Sound Home Theatre system.
Model F600i/1000i flat-panel loudspeakers, the floor plates and the optional Final Sound subwoofer are packed separately. (the 600i/1000i panels for the rear channels in home theatre applications are basically the same panels as the front loudspeakers. All unpackaging and assembling instructions for the rear panels are...
Just follow the pictures for assembling the 600i/1000i models. What´s in the 600i/1000i package? Put the small pin into the hole Fix the pin using the screw and the Allen key Mount the RVS spacer to the pin FINAL SOUND 600i/1000i Loudspeaker Manual vs.
Position the panel over the RVS spacers. Take care not to position your fingers between the panel and the RVS spacer Fix the panel firmly by using the two upper hex bolts and the Allen key FINAL SOUND 600i/1000i Loudspeaker Manual vs. 1.4 -US- c FS 2007RJ...
What is the function of the Final Sound front and rear loudspeaker panels? The Final Sound flat-panel front loudspeakers are the main channels in a stereo setting or a virtual surround system and have a dual role in a home theatre system. The front and rear loudspeakers are used to create ambient effects.
Audio/Video receiver settings The loudspeakers in the Final Sound home theatre system are designed to function in perfect harmony as a full range system together with the subwoofer. For an optimum performance your audio/video receiver settings are very important.
How to install the optimal channel settings differs with the brands of the audio/video receivers and therefore we recommend reading the audio/video receiver manual or contact your dealer how to get the best settings in order to get the Real Final Sound out of your system.
If the vacuum cleaner is very strong, keep some distance between the vacuum cleaner´s brush and the panels. Vacuum clean both black panels (every electrostatic panel does have two black stator plates). FINAL SOUND 600i/1000i Loudspeaker Manual vs. 1.4 -US-...
5. Final Sound 600CP center loudspeaker For building a home theatre based on 600i/1000i using floor standing models, Final recommends a 600CP center panel. Most center panels can be wall mountable or fit to a table top stand. How to unpack a Final Sound center panel? A Final Sound center panel comes in one packaging unit.
Now, you need the T-bar The T-bar should be between the two ‘stands’ Also, attach the black hex bolt to the T-bar The T-bar is between the two stands FINAL SOUND 600i/1000i Loudspeaker Manual vs. 1.4 -US- c FS 2007RJ...
Position the two stands with the T-bar relative to the table top plate like this Fix the two stands to the plate, using the screws and the Allen key Attach the spikes or the feet FINAL SOUND 600i/1000i Loudspeaker Manual vs. 1.4 -US- c FS 2007RJ...
The Final Sound flat-panel center loudspeaker is a true line source, with a single loudspeaker element to deliver precise localization. The Final Sound flat-panel center loudspeaker is designed to function in harmony with the Final Sound subwoofer and the front and rear flat panels.
One user manual for the subwoofer If your package is not complete, do not operate the system but contact your Final Sound Dealer. The easiest way to unpack is the following. Put the box on a flat surface on the ground. Open one side by cutting the tape carefully without damaging the contents of the box.
Where do I place the Final Sound subwoofer? (For placement suggestions: see the figure in chapter ’ Final Sound Model 600i/1000i front and rear loudspeakers’) Coloration, due to resonance, is strongest at bass frequencies between 20 and 200 Hertz. It’s much easier to obtain high absorption at higher frequencies.
Adjust the ‘loudspeaker size’ in the receiver’s menu to SMALL. This will activate the • receiver’s LFE output. You can use this setting for a 600i running with a subwoofer. For running a 1000i without subwoofer, ‘LARGE’ is the preferred setting.
How to adjust a subwoofer This procedure is valid for most subwoofers on the market and also for using the Final Sound subwoofer in ´standard mode´. For adjusting the Final Sound subwoofers in the special high pass mode, we refer to the dedicated subwoofer manuals.
Cross over frequency The Final Sound Subwoofers covers the low frequency range up to 200Hz. While the F600i/1000i covers the frequency range from 38/45Hz up to 20Khz, it is important to define carefully the crossover frequency between the subwoofer and the electrostatic panels, which is influenced by the acoustic properties of the room and the placement of the subwoofer.
The simplicity of the Final Inverter Technology enables the loudsspeaker´s impedance to remain well above 4 ohms across the entire frequency spectrum. This allows the use of smaller amplifiers - as low as 35 watts - to drive the loudspeakers. Most high-performance electrostatic loudspeakers required FINAL SOUND 600i/1000i Loudspeaker Manual vs. 1.4 -US-...
The Inverter technology represents a major breakthrough in electrostatic loudspeaker design. High resolution and detail: The diaphragm’s combination of low mass together with instant acceleration and deceleration, will bring a very natural and fast reproduction of the audio signal. FINAL SOUND 600i/1000i Loudspeaker Manual vs. 1.4 -US-...
Electrostatic loudspeakers have been on the market since 1935, although materials allowing for an optimization of the technology have only become available in the last 10 years. Final Sound uses diaphragms that last a great many years. Final Sound is constantly involved in research to further improve its technology.
Unplug your Final Sound loudspeaker and contact your Final Sound dealer. Why do I need a Final Sound subwoofer? The Final Sound home theater is based on the 5+1 multi channel amplifiers, which require two front loudspeakers, two rear loudspeakers, one center loudspeaker and a subwoofer.
Where can I find more information about Final Sound? For any questions about Final Sound or about installing your loudspeakers, contact your Final Sound dealer or visit our website at www.finalsound.com. FINAL SOUND 600i/1000i Loudspeaker Manual vs.
Final Sound or an authorized Final Sound dealer. If returned, the product must be properly packaged and shipped to Final Sound or an authorized Final Sound dealer by the customer at his or her sole expense.
In the event the product fails to meet the above Warranty and the above conditions have been met, the purchaser’s sole remedy under this Limited Warranty shall be to return the product to Final Sound or an authorized Final Sound dealer where the defect will be rectified without charge for parts or labor.
Thank you very much for taking time to complete in this form and sending it to: Final Sound Eisenhowerweg 8D 5466 AC Veghel The Netherlands For US customers ONLY: Final Sound, L.L.C. 500 West Cummings Park, Suite 2500 Woburn, MA 01801 T:(781) 938-6416 F:(781) 938-6415 C 2007 Final Sound FINAL SOUND 600i/1000i Loudspeaker Manual vs.