Description The Host Cable Adapter (Part # OSS-PCIe-HIB2-x8-H) allows communication between a processor and an I/O port. Slot Cover (also available in low profile height) Switches PCIe x8 Connector PCIe x8 Edge Connector Initial Set-Up Unpacking Instructions If the carton is damaged when you receive it, request that the carrier's agent be present when you unpack and inspect the equipment.
Page 3
Remove the cable by pulling on the green retractor ring which releases the locking mechanism. Loosen and remove the front bracket screw before removing the Host Cable Adapter from the card slot. One Stop Systems, Inc. Host Cable Adapter User Manual...
Vibration: 5-17 Hz 0.5” double amplitude displacement; 7-2000Hz, 1.5g acceleration. Redriver Pericom PI2EQX4402D Agency Compliance Designed to meet, but not tested UL60950, FCC Class A, CE safety and emissions Block Diagram One Stop Systems, Inc. Host Cable Adapter User Manual Rev. A...
One Stop Systems will, at its option, repair or replace this product at no additional charge to the purchaser, if the defect is related to the One Stop Systems manufactured product, such as a power supply, backplane, other chassis components or CPUs. One Stop Systems is not liable for any defects in material or workmanship of any peripherals, products or parts, which One Stop Systems does not design or manufacture.
Need help?
Do you have a question about the OSS-PCIe-HIB2-x8-H and is the answer not in the manual?
Questions and answers