Unpacking; Contents - MK Diamond Products MK-660 Owner's Manual

MK-660 tile saw

UNPaCKiNG

Your MK-660 Saw has been shipped from the factory thoroughly inspected. Only minimal assembly
is required.
CaUtiON Use proper lifting techniques when lifting the MK-660 Saw.
If not done, remove the MK-660 Saw, Cutting Head and accessory box from the carton.

CONteNts

In your container, you will find one (1) MK-660 Frame and Water Pan, one (1) MK-660 Cutting Head,
(1) Cutting Head Height Adjusting Knob, (1) Height Adjusting Knob Flat Washer, one (1) 7-inch Wet
Cutting Continuous Rim Diamond Blade, one (1) Adjustable Cutting Guide, one (1) Electric Water
Pump, one (1) Pump Discharge Fitting, one (1) Cooling Transfer Tube, one (1) Flow Adjusting
Clamp, one (1) Drain Plug, one (1) Blade Wrench, one (1) Table Clip, one (1) Inner Flange Wrench,
(1) Splash Guard, one (1) Owner's Manual, one (1) Pump Manual and one (1) Warranty Card.
MK-660 Frame
and Water Pan
Adjustable
Cutting Guide
Drain Plug
Pump Manual
MK-660 Cutting Height Adjusting
Head
Electric Water Pump Discharge
Pump
Blade Wrench
and Table Clip
MK DiaMonD Warranty CarD
Name
address
City
state zip Code
phoNe Fax
e-mail
produCt model
part NumBer
maChiNe serial#
where did you purChase this saw From? Name date purChased
q tile distriButor q home CeNter q equipmeNt supply house
q tool supply q Bldg material supply q reNtal equipmeNt house
are you a do-it-yourselFer q or CoNtraCtor q IF so, what type? tile q masoNry q other
what Criteria was importaNt iN ChoosiNg this saw? (rate From 1 to 5, 5 BeiNg the most importaNt)
priCe power preCisioN portaBility availaBility other
CommeNts or suggestioNs:
mK diamoNd warraNty 1315 Storm Parkway, Torrance, CA 90509 USA | www.mkdiamond.com | 1.800.421.5830 | 1.310.539.5158
If within one (1) Year from the date of purchase, this MK Diamond saw fails due to defect in material or workmanship, MK will repair it, free of charge when the unit is re-
turned to the dealer where it was purchased. This warranty DOES NOT cover normal wear or damage resulting from operator abuse. In no event shall MK Diamond Products,
Inc. be liable for consequential damages arising out of the failure of any product if operated improperly. MK Diamond Products may act as a warranty station for motor/en-
gine repairs based on an individual agreement with the manufacturer. This warranty is in lieu of all other warranties express or implied.
©2010 All Rights reserved. MK Diamond Products, Inc. • P/N 155037 MK Warranty Card (02/10)
Warranty Card
Height Adjusting
Knob Knob Flat Washer
Cooling Transfer
Fitting
Inner Flange Splash Guard
Wrench
13
UNPaCKiNG
Diamond Blade
Flow Adjusting
Tube Clamp
www.mkdiamond.com www.mkdiamond.com
Revision 100 Revision 100 04.2010 04.2010
Manual Part# 153461 Manual Part# 153461
Caution: Read all safety and operating instructions Caution: Read all safety and operating instructions
before using this equipment. This parts list MUST before using this equipment. This parts list MUST
accompany the equipment at all times. accompany the equipment at all times.
Owner's Manual
MK-660 SerieS MK-660 SerieS
OWNERS MANUAL OWNERS MANUAL
PARTS LIST & PARTS LIST &
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS