Monitors, Matrix Routing Switchers and Distribution Amplifiers. Liability Statement Every effort has been made to ensure that this product is free of errors. TV One cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use.
Note: Please retain the original packing material should the need ever arise to return the unit. If you find any items are missing, contact your reseller or TV One immediately. Have the Model Number, Serial Number and Invoice available for...
PC. 4.1 1T-VGA-CAT Transmitter and Receiver 1T-VGA-CAT: Connect the PC’s display output to the VGA IN connector on the transmitter. Connect a CAT 5 cable’s RJ-45 connector to the CAT 5 RJ-45 receptacle on the Transmitter module. At the remote end (no more than 580 feet away for this product), connect the other end of the CAT 5 cable to the Receiver’s RJ-45...
Page 9
4.2 1T-VGA-CAT-XL Transmitter and Receiver 1T-VGA-CAT-XL: Connect the PC’s display output to the VGA IN connector on the transmitter and then connect a monitor to the VGA LOOP OUT connector if you desire to observe the PC output locally. Connect a CAT 5 cable’s RJ-45 connector to the CAT 5 RJ-45 receptacle on the Transmitter module.
Page 10
4.3 1T-VGAST-CAT-XL Transmitter and Receiver 1T-VGAST-CAT-XL: Connect the PC’s display output to the HD-15 INPUT connector on the transmitter and then connect a monitor to the HD-15 OUTPUT connector if you desire to observe the PC output locally. Connect a CAT 5 cable’s RJ-45 connector to the CAT 5 RJ-45 receptacle on the Transmitter module.
Page 11
5 RJ-45 connectors on the transmitter and lastly connect the AC adapter first to the unit and then to the AC wall socket. As explained in the notes above, you will need a dedicated 1T-VGA-CAT-RXL receiver at each remote viewing location to feed the remotely located VGA display device.
Page 12
1T-VGA-CAT-RXL: Connect the VGA display’s input to the VGA OUT connector on the 1T-VGA-CAT-RXL Receiver and then connect one of the CAT 5 cables to the CAT 5 RJ-45 connector on the Receiver. Lastly connect the AC adapter first to the unit and then to the AC wall socket.
Page 13
4.7 Sample Systems To better understand how to connect the various combinations of CAT.5 VGA Extender Products, Please refer to the drawings below.
With the exception of the MIC AUDIO adjustment on the 1T-VGAST-CAT-XL transmitter described above, only two adjustments are possible on the 1T-VGA-CAT product line and a total of three are possible on the 1T-RGB-DELAY product.
After trying the above suggestions should the problem still persist, contact your dealer for additional suggestions before contacting TV One. Should the dealer’s technical personnel be unable to assist you, contact TV One via our support website: http://tvone.crmdesk.com. Create a technical support request on the...
11.0 CONTACT INFORMATION Should you have questions or require assistance with this product in areas not covered by this manual, please contact TV One at the appropriate location shown below: TV One USA TV One Europe 1350 Jamike Drive Continental Approach...
Page 20
Tel +44 (0)1843 873311 Fax 859-282-8225 Fax +44 (0)1843 873312 sales@tvone.com sales.europe@tvone.com www.tvone.com www.tvone.co.uk TV One Latin America TV One Mercosur 2790 NW 79 Ave Honduras 5849, 2 Floor, Office C Miami, FL 33122 (C1414BNI) Capital Federal Buenos Aires, Argentina...
Need help?
Do you have a question about the 1T-VGA-CAT and is the answer not in the manual?
Questions and answers