Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for TV One 1T-CT-610 Series
Summary of Contents for TV One 1T-CT-610 Series
-
Page 1: Instruction Manual
Instruction Manual 1T-CT-610 Series HDMI to CAT.6 Extenders... -
Page 3: Table Of Contents
Table of Contents Introduction Specifications Checking Package Contents Connecting The Hardware Operating The Unit Troubleshooting Limited Warranty Regulatory Compliance Contact Information... -
Page 4: Introduction
Routing Switchers, Signal Distribution Amplifiers and Cat.5 Transmission Systems. Liability Statement Every effort has been made to ensure that this product is free of errors. TV One cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use. - Page 5 Features This series of HDMI to CAT.6 Extender systems have many features that enable them to perform in a superior manner. Among these features you will find: • Resolutions to 1920x1200, 1080p @ 60Hz • 1080p/8 Bit signal distribution up to 45 meters (150 feet) •...
-
Page 6: Specifications
SPECIFICATIONS Video I/O 1T-CT-611 Tx-HDMI Input 1x via HDMI Connector 1T-CT-612 Rx-HDMI Output 1x via HDMI Connector Cat.6 I/O 1T-CT-611 Tx – Cat.6 Output 2x via RJ-45 (Video & DDC) 1T-CT-612 Rx – Cat.6 Input 2x via RJ-45 (Video & DDC) 1T-CT-613 Repeater I/O 4x via RJ-45 (2x Video &... -
Page 7: Checking Package Contents
Note: Please retain the original packing material should the need ever arise to return the unit. If you find any items are missing, contact your reseller or TV One immediately. Have the Model and Serial Number and Invoice available for reference when you call. - Page 8 1T-CT-611 Transmitter Connect the HDMI source device’s output to the HDMI IN connector of the 1T-CT-611 Transmitter, using an appropriate HDMI cable of no more than 15 meters (45’) in length. 1. Connect a Cat.5e or Cat.6 cable to the Video output connector of the Transmitter. Connect a second Cat.5e or Cat.6 cable to the DDC output of the Transmitter.
- Page 9 1. At the remote location, connect the appropriate Cat.5e or Cat.6 cables to the Video input and DDC Input connectors of the Receiver. Do not interchange the cables. The Video cable must be connected to the video inputs and outputs in both the Transmitter and the Receiver products and the DDC cable must likewise be connected to the DDC inputs and outputs on the devices.* 2.
-
Page 10: Operating The Unit
After trying the above suggestions should the problem still persist, contact your dealer for additional suggestions before contacting TV One. Should the dealer’s technical personnel be unable to assist you, contact TV One via our support website: http://tvone.crmdesk.com. Create a technical support request on the site and our support team will respond within a short period of time. -
Page 11: Limited Warranty
Should this product, in TV One’s opinion, prove defective within this warranty period, TV One, at its option, will repair or replace this product without charge. Any defective parts replaced become the property of TV One. This warranty does not apply...
Need help?
Do you have a question about the 1T-CT-610 Series and is the answer not in the manual?
Questions and answers