INTRODUCTION Thanks for purchasing this Cat.5 Extender Product from TV One. This Product line is designed to transport VGA and YPbPr signals over great distances using CAT.5/5E or CAT.6 premium grade network cables. Our professional video conversion products have been serving the industry for over twenty years. TV One offers a full line of high quality Seamless Switchers, Video Scalers, Up/Down/Cross Converters, Analog-Digital Converters (SD/HD-SDI, HDMI, DVI), Format Converters, Standards Converters, TBC/Frame Synchronizers, Matrix Routing Switchers, Signal Distribution Amplifiers and...
Transmitter Features and Compatibility Chart Transmitter Signal Stereo Maximum Cat.5 Compatible Model Type Audio Distance Receivers 1T-CT-441 RGBHV None 300M (1000’) 442, 444 1T-CT-443 RGBHV Yes (1) 300M (1000’) 442, 444, 452, 456 1T-CT-453 YPbPr Yes (1) 300M (1000’) 1T-CT-467 RGBHV 300M (1000’) 442, 444, 452, 456...
Page 6
Transmitters Video Inputs 1T-CT-441, 443, 467 1x RGBHV via HD-15 1T-CT-453 1x YPbPr via 3x RCA Video Outputs 1T-CT-441, 443, 467 1x RGBHV via HD-15 Audio Inputs 1T-CT-441 None 1T-CT-467 1x Analog Stereo via 3.5mm 1T-CT-443, 453 1x Analog Stereo via 3.5mm, 1x S/PDIF via Toslink Audio Outputs 1T-CT-441 None...
Page 7
Receivers UTP Inputs All Receiver Models 1x via RJ-45 Connector UTP Outputs 1T-CT-456 1x via RJ-45 Connector for Cat.5 Repeater function Video Outputs 1T-CT-442, 444, 452, 456 1x RGBHV via HD-15 1T-CT-464 1x YPbPr via 3x RCA Audio Outputs 1T-CT-442, 444 None 1T-CT-452, 456, 464 1x SPDIF via Toslink and 1x Analog via 3.5mm Mini St.
CHECKING PACKAGE CONTENTS Before attempting to use this unit, please check the packaging and make certain the following items are contained in the shipping carton: • 1x Transmitter or Receiver unit • 1x Power Adapter (except 1T-CT-467) • 1x AC Power Cord (1T-CT-467 only) •...
Page 9
1T-CT-400 Series Transmitters 1. Connect the source device’s video output to the VIDEO IN connector of the Transmitter, using the appropriate cable. All models except the 1T-CT-453 have a VIDEO OUT connector that can provide a loop-thru signal to a local monitor.
Page 10
1T-CT-400 Series Receivers 1. At the remote location, connect the other end of the Cat.5/5E or Cat.6 cable to the UTP IN connector of the Receiver. 2. Connect the VIDEO OUT connector of the Receiver to the video input of the remote display or other device, using the appropriate cable.
OPERATING THE UNITS Once the connections have been made and power applied, there is little in the way of operational adjustments required. All Receivers have Equalization and Gain adjustments. Additionally, the 1T-CT-444 and 1T-CT-456 have Skew Compensation adjustments. Equalization and Gain Adjustments On all Receiver models, locate the EQ (Equalization) and GAIN adjustments on the side of the Receiver.
Locate the RGB Skew Adjust buttons on the side of the Receiver. While watching the remote display, press and HOLD either RGB skew adjust button. After three seconds, the RGB adjust indicator LED starts blinking; Receiver is now in RGB Skew Adjust Mode. The color of the blinking LED indicates the color being adjusted.
REGULATORY COMPLIANCE The 1T-CT-400 Series Extender products have been tested for compliance with appropriate FCC and CE rules and regulations. The Power Adaptor/Supply has been tested for compliance with appropriate UL, CUL, CE, PSE, GS Rules, Regulations...
CONTACT INFORMATION Should you have questions or require assistance with this product in areas not covered by this manual, please contact TV One at the appropriate location shown below. TV One USA TV One Europe 2791 Circleport Drive Continental Approach Erlanger, KY 41018 Westwood Industrial Estate Margate, Kent CT9 4JG, UK...
Need help?
Do you have a question about the 1T-CT-400 Series and is the answer not in the manual?
Questions and answers