Panasonic Lumix DMC-FX80 Operating Instructions Manual page 51

Panasonic dmc-fx80 digital camera operating instructions for advanced features
Table of Contents

Advertisement

[Format]
Use a battery with sufficient battery power when formatting. Do not turn the camera off during
formatting.
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
If the card has been formatted on a PC or other equipment, format it on the camera again.
It may take longer to format the built-in memory than the card.
If you cannot format, contact the dealer or your nearest Service Centre.
[Language]
If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
[Demo Mode]
The Stabiliser function is switched between [On] and [Off] every time [Stabilizer] is touched
during the [Stabilizer Demo.].
[Stabilizer Demo.] is an approximation.
[Auto Demo] is not output to the television.
The built-in memory or card is formatted (Pictures in My Photo
Album are also formatted). Formatting irretrievably deletes all
the data so check the data carefully before formatting.
Set the language displayed on the screen.
Displays the amount of jitter the camera has detected. ([Stabilizer
Demo.])
The camera's features are displayed as slide shows. ([Auto Demo])
[Stabilizer Demo.]
A Amount of jitter
B Amount of jitter after correction
[Auto Demo]:
[On]
[Off]
- 51 -
Basic
A
B

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents