Panasonic Lumix DMC-FX80 Operating Instructions Manual page 50

[3D Playback]
•
This will work when the HDMI mini cable (optional) is connected.
•
Refer to P134 for the method to playback 3D pictures in 3D.
[Rotate Disp.]
•
Refer to P33 for information about how to play back pictures.
•
When you play back pictures on a PC, they cannot be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by "JEITA (Japan Electronics and
Information Technology Industries Association)".
•
It may not be possible to rotate pictures that have been recorded with other equipment.
•
The display is not rotated during Multi Playback.
[Version Disp.]
•
Touch [Software info] on the version display screen to display information about the software on
the unit.
Setup the output method for 3D pictures.
[3D]:
Set when connecting to a 3D compatible television.
[2D]:
Set when connecting to a television not compatible with 3D.
Set this when you would like to view pictures in 2D (conventional
image) on a 3D compatible television.
This mode allows you to display pictures vertically if they were
recorded holding the camera vertically.
[On]:
[External Only]:
[Off]
It is possible to check which version of firmware is on the camera.
- 50 -
Basic
Rotate pictures on a TV and the LCD
display so that they are displayed
vertically.
Rotate only the picture on a TV so that it is
displayed vertically.