Panasonic Lumix DMC-FX80 Operating Instructions Manual page 141

Note
•
Use a battery with sufficient battery power. If the remaining battery power becomes low while
the camera and the PC are communicating, the status indicator blinks and the alarm beeps.
"
Refer to Disconnecting the USB connection cable safely
USB connection cable. Otherwise, data may be destroyed.
•
Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.
∫ Viewing the contents of the built-in memory or card using the PC (folder
composition).
For Windows: A drive ([Removable Disk]) is displayed in [Computer]
For Mac: A drive ([LUMIX], [NO_NAME] or [Untitled]) is displayed on the
desktop
A new folder is created when pictures are taken in the following situations.
•
After [No.Reset] (P48)
•
When a card containing a folder with the same folder number has been inserted (such as when
pictures were taken using another maker of camera).
•
When there is a picture with file number 999 inside the folder
Connecting to other equipment
DCIM:
MISC:
AVCHD:
AD_LUMIX:
¢ Cannot be created in the built-in memory.
in the [Setup] menu has been executed
- 141 -
"
(P142)
1 Folder number
2 File number
3 JPG:
MP4:
MPO:
4 [My Photo Album]
LUMIXUP.EXE:
before disconnecting the
Images
Still pictures
[MP4] Motion pictures
3D pictures
DPOF print
Favourite
[AVCHD] Motion pictures
For Upload set
Upload tool
"LUMIX Image Uploader"