Casio EX-10 User Manual page 43

M M (Manual Exposure) mode
This mode gives you total control over aperture and shutter speed settings.
Press [SET] to open the Control Panel.
1
Use [8] and [2] to select
2
Use [8] and [2] to change the aperture setting, and then press [4].
3
Use [8] and [2] to select
4
Use [8] and [2] to change the shutter speed setting, and then press [SET].
5
S S (Shutter Speed AE) mode
In this mode, you select the shutter speed and other settings are adjusted
accordingly.
Press [SET] to open the Control Panel.
1
Use [8] and [2] to select
2
Use [8] and [2] to change the shutter speed setting, and then press [SET].
3
• You also can select the EV shift setting located under the shutter speed
setting and then specify an exposure value (EV shift), if you want.
A A (Aperture AE) mode
In this mode, you select the aperture and other settings are adjusted
accordingly.
Press [SET] to open the Control Panel.
1
Use [8] and [2] to select
2
Use [8] and [2] to change the aperture setting, and then press [SET].
3
• You also can select the EV shift setting located under the aperture setting
and then specify an exposure value (EV shift), if you want.
IMPORTANT!
• The flash > (Auto Flash) and ¥ (Red Eye Reduction) flash modes are not
supported while A, S, or M is selected for the recording mode. If you want the flash
to fire, select < (Flash On) as the flash mode.
• The displayed ISO sensitivity, shutter speed or aperture value will turn red when
you half-press the shutter button if the image is overexposed or underexposed.
• Selecting S or M for the recording mode and using a slow shutter speed will cause
the monitor screen to go blank during the period from when the shutter button is
pressed until image recording is complete. Camera operations are disabled during
this time. Wait until the back lamp goes out and an image appears on the monitor
screen again.
(Aperture), and then press [SET].
A
(Shutter Speed), and then press [SET].
S
(Shutter Speed), and then press [SET].
S
(Aperture), and then press [SET].
A
43
Snapshot Tutorial