Dhcp - Eusso Wireless-N 4-Port Router User Manual

DHCP

The DHCP server is enabled by default for the router's Ethernet LAN interface. DHCP service
will supply IP settings to workstations configured to automatically obtain IP settings that are
connected to the router though the Ethernet port. When the router is used for DHCP it becomes
the default gateway for DHCP client connected to it. The IP address pool can be up to 253 IP
addresses and must be in the subnet of the router's IP address. The default IP address pool
uses 100 IP addresses in the 192.168.1.100 – 192.168.1.199 range.
DHCP Server for LAN Settings menu
To display the DHCP Server menu, click the DHCP link in the Home directory. Any active DHCP
clients appear in the DHCP Clients List with their IP address and MAC address listed.
The options for DHCP service are as follows:
Use the router as a DHCP server for your LAN. (DHCP Server Enabled)
Disable DHCP service and manually configure IP settings for workstations.
Select Static IP Addresses in the subnet for specified devices that do not age out - this
can be used in combination with normal DHCP service.
- 47 -