Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Eusso 5-Port
Summary of Contents for Eusso 5-Port
- Page 1 5/8/16-Port 10/100Mbps Fast Ethernet Switch User’s Manual...
-
Page 2: Fcc Compliance Statement
FCC COMPLIANCE STATEMENT This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the instructions provided with the equipment, may cause interference to radio and TV reception. The equipment has been tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference in a... -
Page 3: Table Of Contents
Contents Chapter 1 Introduction ........1 Chapter 2 Features & Specifications ....2 Chapter 3 Package Contents ......4 Chapter 4 Physical Description .......5 Chapter 5 Installation ........7 Chapter 6 Trouble-shooting ......8... -
Page 4: Chapter 1 Introduction
Introduction Congratulations on your purchase of EUSSO’s 5/8/16-port desktop Fast Ethernet Switch. This high performance switch provides five/eight/sixteen Fast Ethernet ports to segment network traffic, extend Fast Ethernet connection distance, and convert data packets between different transmission speeds. Importantly it provide the Auto MDI/MDI-X function on all of UTP ports, so you don’t worry about whether the... -
Page 5: Chapter 2 Features & Specifications
Features & Specifications (1) Features Comply with IEEE 802.3 10Base-T Ethernet and 802.3u 100Base-TX Fast Ethernet Standards. Simple and economical way to bridge 10Base-T network and 100Base-TX network. Easily connect and segment Fast Ethernet hubs or segments. All of RJ-45 ports support Auto-MDI/MDI-X function All of RJ-45 ports support 10Base-T/100Base-TX and Full-Duplex /Half-Duplex Auto-negotiation function. - Page 6 (2) Specifications Standards : IEEE 802.3 and 802.3u 10/100Mbps Ports : 5 Port switch -- RJ-45 x 5 Auto-MDI/MDI-X 8 Port switch -- RJ-45 x 8 Auto-MDI/MDI-X 16 Port switch -- RJ-45 x 16 Auto-MDI/MDI-X Switching Architecture : Store and Forward Filter/Forward Rate : 148,800 packets/sec.
-
Page 7: Chapter 3 Package Contents
One Fast Ethernet Switch One external power adapter User’s manual 5-Port 10/100Mbps COL/FD X Fast Ethernet Switch PO WER LN K/AC T 5-Port Fast Ethernet Switch 8-Port 10/100Mbps CO L/ FD X Fast Ethernet Switch POWER LN K/AC T 8-Port Fast Ethernet... -
Page 8: Chapter 4 Physical Description
Physical Description (1) Panel Power LED 100/10Mbps LED LED Panel 5-Port 10/100Mbps 100M Fast Ethernet Switch POWER LNK/ACT 5-Port Fast Ethernet Link/Activity LED Switch RJ45 Connectors Power Connector Power LED 10/100M LED LED Panel 8-Port 10/100Mbps 100M Fast Ethernet Switch... - Page 9 (2) LED Color Status Description Power is supplied Green (Power) No power A valid link is established LNK/ACT Green Flash Data packets received (Link/Activity) No link is established This port run at 100Mbps SPEED Yellow (10/100M) This port run at 10Mbps Table 4-1 LED description...
-
Page 10: Chapter 5 Installation
Installation 1. Operating Environment This switching hub must be installed and operated within the limits of specified operating temperature and humidity (see previous section under Specifications). Do not place objects on top of the unit. Do not obstruct any vents at the sides of the unit. Do not position the unit near any heating source such as heater, radiator, or direct exposure to sun. -
Page 11: Chapter 6 Trouble-Shooting
Trouble-shooting 1. Power LED is not lit Check if the power cord is properly connected to the external power adapter and the power outlet. Make sure the DC power jack is firmly plugged into the power socket of the switch. 2.
Need help?
Do you have a question about the 5-Port and is the answer not in the manual?
Questions and answers