Basic Wireless Setup - Eusso Wireless-N 4-Port Router User Manual

Basic Wireless Setup

To configure the router's basic wireless and wired network configuration settings without running
the Setup Wizard, you can access the windows used to configure Wireless, WAN, LAN and
DHCP settings directly from the Home directory. To access the Wireless Settings window, click
on the Wireless link on the left side of the first window that appears when you successfully
access the web manager.
Wireless Settings menu – default settings
By default the wireless AP is enabled for use by 802.11b, 802.11g and 802.11n workstations.
The Set Wireless Mode options are used to configure the access point to use 11b only, 11g
only, 11n only, a mix of 11b and 11g, or a mix of all three standards. To turn off all wireless
function, select the Disable option.
The SSID identifies members of the Service Set. Accept the default name or change it to
something else. All other devices on the wireless network using the Wireless Broadband Router
must use the same SSID.
What channels are available for use by the access point depends on the local regulatory
environment. Remember that all devices communicating with the device must use the same
channel (and use the same SSID). Use the drop-down menu to select the Channel used for
your 802.11 Wireless LAN. The wireless channel number is available from your Internet Service
Provider (ISP).
If network Security is not used, click None, then click Apply.
NOTE: For wireless stations that support WPS push button method, the easiest way to establish a
secure connection is to simultaneously press the WPS button on the wireless workstation and the
WPS button on the front of the Wireless Broadband Router. See below for more information on WPS.
Wi-Fi Protected Function is enabled by default. See below for more information on Wi-Fi
Protected Status or WPS.
- 27 -