Installation Notes; Internet Connection; Operating Systems; Web Browser - Eusso Wireless-N 4-Port Router User Manual

Wireless-n 4-port router

Hide thumbs Also See for Wireless-N 4-Port Router:

Table of Contents

Installation Notes

In order to establish a connection to the Internet it will be necessary to provide information to the

router that will be stored in its memory. For some users, only their account information (User

Name and Password) is required. For others, various parameters that control and define the

Internet connection will be required.

The Wireless-N Router is intended for use with a broadband device such as an ADSL, xDSL or

cable (CATV) modem. The physical connection to the Internet must first be established through

a broadband device, typically this should be set up as an invisible bridge.

The Wireless-N Router uses an HTML-based web interface for setup and management. The

web configuration manager may be accessed using any operating system capable of running

web browser software, including Microsoft Windows® operating systems.

Any common web browser can be used to configure the router using the web configuration

management software. The program is designed to work best with more recently released

browsers. The web browser must have JavaScript enabled. JavaScript is enabled by default on

many browsers. Make sure JavaScript has not been disabled by other software (such as virus

protection, firewall software or Internet security packages) that may be running on your computer.

Ethernet or Wireless Adapter

Any computer that uses the router must be able to connect to it through an Ethernet port or

through the wireless 802.11n/g/b connection. The computer therefore must have either an

Ethernet adapter or 802.11n/g/b adapter installed. Network adapters are standard for most

computers sold presently.

Table of Contents