Bridge Connection - Eusso Wireless-N 4-Port Router User Manual

Bridge Connection

A Bridge connection does not require much configuration for the router, however most of the
router functions are not available in bridge mode.
WAN Settings menu – Bridge connection
To configure the Wireless-N Router as a bridge for the WAN connection, select the Bridge WAN
settings option and click Apply. Do this immediately change the IP settings status of the device
to DHCP client. Be sure to have a DHCP server running and connected to the network if this
option is to be used. Remember that as a bridge, third party connection software is normally
required on each computer attempting to get Internet access.
- 41 -