Network Smtp Settings - Planet ICA-HM125 User Manual

3.8.3 Network SMTP Settings

You may setup SMTP mail parameters for further operation of Event Schedule. That's, if users
want to send the alarm message out, it will need to configure parameters here and also add at
least one event schedule to enable event triggering.
SMTP (email) Setting:
Test:
Mail Server:
Type the SMTP server name or the IP address of the SMTP server.
Server Port:
Set port number of SMTP service.(The default value is 25)
Authentication:
Select the authentication required when you send an e-mail.
User Name:
Type the user name for the SMTP server if Authentication is Enable.
Password:
Type the password for the SMTP server if Authentication is Enable.
From (Email Address):
Type the sender's E-mail address. This address is used for reply
e-mails.
Send test email to:
Send a test mail to mail server to check this account is available or not.
48