Advertisement
2. An air pressure of 90 PSI is required.
3. Drain the air tank daily. Water in the airline can damage the tool.
4. Clean the air inlet filter weekly.
5. Line pressure should be increased to compensate for longer air hoses (over 26 feet or 8
meters). The hose diameter should be 3/8in. I.D.
6. Keep the hose away from heat, oil and sharp edges. Check the hose for wear and make
certain that all connections are secure.
WARNING: Make sure the Air Grinder is disconnected from its power source before attempting any
maintenance, cleaning, or inspection.
·
Maintain your Air Grinder. It is recommended that the general condition of any tool be examined before
it is used. Keep your Air Grinder in good repair by adopting a program of conscientious repair and
maintenance in accordance with the recommended procedures found in this manual. If any abnormal
vibrations or noise occurs, turn the Air Grinder off immediately and have the problem corrected before
further use. Have necessary repairs made by qualified service personnel.
·
Keep all cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control. Keep handles dry, clean, and free from oil and grease.
·
Cleaning. Use only soap and a damp cloth to clean your Air Grinder. Many household cleaners are
harmful to plastics and other insulation. Never let liquid get inside the Air Grinder.
MAINTENANCE
5 OF 7
Advertisement
