SEC-1260A/SEC-1280A (for 12 V batteries) and SEC-2440A (for 24 V batteries) are high
current, 3 Stage Chargers that deliver 60 A, 80 A and 40 A respectively for almost 75% to
80% of the charging cycle ensuring a very fast, safe and complete charging of lead acid
batteries. The nomenclature " I Uo U" is a DIN nomenclature and signifies the 3 charging
stages – I for constant current Bulk Charge Stage 1, Uo for constant over voltage Absorption
/ Boost Stage 2 and U for constant voltage Float / Maintenance Stage 3 ( under DIN
specification, voltage is designated "U" and current is designated "I". The subscript "o" in
"Uo" signifies over voltage).
•
Fully automatic – "Connect and Forget" operation.
•
Suitable for flooded , AGM or Gel Cell type of lead acid batteries.
•
State-of-the-art switched mode technology is used for high efficiency, lightweight
and quiet operation.
•
User selectable 2 or 3-Stage automatic charging algorithm with timed Boost /
Absorption Stage and temperature compensation ensures rapid, safe and full
return of capacity.
•
Ability to reduce maximum charging current to approximately 1/2 of the rated
capacity during "Half Power Mode". This allows safe charging of lower capacity
batteries.
•
Includes a Battery Temperature Sensor allowing temperature compensated charg-
ing, if required.
•
2 banks of batteries can be charged simultaneously without the use of an external
battery isolator. The charging current will be shared between the two banks de-
pending upon the depth of discharge of the connected batteries.
•
3 colour LED indicates charging status.
•
Fan cooled - fan on/off based on output current.
•
Protections against short circuit, over current, reverse battery connection and
over-temperature.
•
Can be used as a power supply or as a DC UPS ( Uninterruptible Power Supply)
when used in conjunction with a battery.
•
Optional Remote LED Panel with 10 Metres of wire for remote on / off control
and indication of charging status.
DESCRIPTION
FEATURES
Page 3