Samlexpower SEC-1260A Owner's Manual page 20

DIP Switch Setting for SEC-2440A
S 1 S 2 Float
Stand-alone charging
OFF * ON * 27 V *
ON OFF 27 V
Charging loaded battery
or
Charging two banks and the batteries in the two banks are in dissimilar discharged
condition
OFF OFF 27 V
* Factory preset in this position
CAUTION!
Please ensure that position S1- ON and
S2 – ON is never selected
SELECTING THE TIME FOR STAGE 2 - CONSTANT OVERCHARGE VOLTAGE,
TIMED ABSORPTION / BOOST CHARGE MODE ("Uo" PHASE)
Stage 2 - Constant Overcharge Voltage, Timed Absorption / Boost Charge Mode ("Uo"
Phase) is controlled by an internal timer circuit. Time of 4 hours or 8 hours can be selected
with the help of a pair of switches S3 & S4 of the set of 4 DIP Switches (5). Select the times
as follows:
Time DIP Switch S3
4 hours* Off*
8 hours On
Disable Off
* Factory preset in this position
CAUTION!
Please ensure that position S3- ON and
S4 – ON is never selected
Boost Battery Type
/ Application
28.8 V * Flooded / AGM *
28.0 V Gel Cell
27.0 V Loaded Battery
(can be Flooded
/ AGM / Gel Cell)
DIP Switch S4
On*
Off
Off
Page 19
Charging Stages
3 Stages (Stages 1, 2, 3)
3 Stages (Stages 1, 2, 3)
2 Stages (Stages 1, 3)
Type of Battery
Flooded / wet cell
Gel Cell & AGM
-