Beem B7.001 Instruction Manual page 56

Initial use
EN
56
■ / : These buttons are used to increase or decrease
the appliance timer settings in 10 minute steps. Note that the dis-
played time indicates when the baking process will be completed.
A maximum setting of 15 hours is possible.
Example: On the display, the timer shows 6:30. This means that
the baking programme will be finished in 6 hours and
30 minutes.
When you start the programme with the
the timer starts to run down. Your bread will be ready
in 6 hours and 30 minutes.
These buttons are also used to set the baking time for menu 10.
When the appliance is connected to the power supply, the following
basic setting appears on the display:
The individual phases of the baking programmes are depicted to the
left and right of the display. When the
gle on the left or right side of the display indicates the momentary
phase of the baking programme.
Timer (if starting delay
is active)
Preheating of the bread
maker
Kneading of the dough
Resting of the dough
button is pressed, a trian-
Rising of the dough
Baking of the dough
Holding the finished
product
End of the programme
BEEM - Elements of Lifestyle
button,