Beem B7.001 Instruction Manual page 53

Inserting the baking form
First press the dough hook/agitator onto the driving pin of the
‹
baking form.
Lower the baking form into the appliance so that it is not quite
‹
straight.
Then turn the baking form in clockwise direction until it locks.
‹
Removing the baking form
Open the appliance cover.
‹
Turn the baking form at the handle in anti-clockwise direction as
‹
far as it will go.
Lift the baking form out of the appliance.
‹
WARNING
Danger of burns!
Housing, baking form and heater coil become very hot dur-
ing operation!
► Wear oven gloves when removing the baking form from the ap-
pliance at the end of the baking programme.
BEEM - Elements of Lifestyle
Initial use
EN
53