Waterline Technology AlwaysFresh H2O AP-UCBS-KIT Installation & Operating Instructions Manual

Under cabinet plumbed-in beverage system with programmable clock/timer and lighted display

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Installation & Operating Instructions

Under Cabinet Plumbed-In Beverage System

With Programmable Clock/Timer and Lighted Display

Model: AP-UCBS-KIT

Unit Shown with Optional Tall Carafe, Medium Size Carafe is Included)

961 N. Main Street, Mansfield, OH 44903

419.529.3949 • 800.522.3949 • Fax 419-529-8484

USA E-mail:

waterline@alwaysfreshh2o.com

Website:

www.alwaysfreshh2o.com

1/1/2008

Instruction Number: WL-9600284

Table of Contents

Summary of Contents for Waterline Technology AlwaysFresh H2O AP-UCBS-KIT

Page 1 Installation & Operating Instructions Under Cabinet Plumbed-In Beverage System With Programmable Clock/Timer and Lighted Display Model: AP-UCBS-KIT Unit Shown with Optional Tall Carafe, Medium Size Carafe is Included) 961 N. Main Street, Mansfield, OH 44903 419.529.3949 • 800.522.3949 • Fax 419-529-8484 USA E-mail: waterline@alwaysfreshh2o.com Website:...
Page 2 Thank you for purchasing the Alwaysfreshh2o Beverage System. Over 75 years of experience in designing and manufacturing commercial brewing equipment goes into every brewer. Matching commercial quality components with consumer friendly features have created the best brewer available for the residential market. This solid state programmable brewer will brew fresh filtered water when you connect the Alwaysfreshh2o high flow drinking water system included with this model.
Page 3 IMPORTANT INFORMATION & SAFEGUARDS Read all instructions and safeguards carefully and completely before installing or operating this equipment. Save all instructions for future reference. To reduce the risk of fire or electric shock, do not remove covers. There are no end user serviceable parts inside. Repairs should be done by authorized service personnel only.
Page 4: Appliance Information
APPLIANCE INFORMATION APPLIANCE SPECIFICATIONS: Model Numbers: AP-UCBS Descriptions: AP-UCBS-KIT With Programmable Clock/Timer and LIGHTED Display Dimensions: 13” W x 3-9/16” H x 7-3/16” D Volts: 120 Watts: 1600 Amps: 13.6 Hertz: 60 Phase: 1 Power Supply Cord: 4 Ft., 3 Wire w/Ground Plug: NEMA 5-15P.
Page 5 CONTROL LOCATIONS AND DESCRIPTIONS Fig. 1 “+” Button Toggle Switch (On-Off-Fill) Press to adjust the clock (hr) and or adjust the time (hr) for Turns ON the power to the coffee appliance and fills the tank “Brew Start Time”. prior to use. “-”...
Page 6: Installation Instructions
INSTALLATION INSTRUCTIONS WARNING: Read these installation instructions completely before connecting this brewer to a power supply or water supply. The water tank must be filled with water for this brewer to function properly. WARNING: Incorrect installation or operating procedures will void the warranty and may damage this brewer. Note: Any changes to the internal plumbing or wiring of the building should be performed by a licensed plumber or a licensed electrician.
Page 7: Plumbing Connection
PLUMBING CONNECTION: (See Fig. 3 below for a typical water line connection.) Note: This brewer is designed to operate with water pressure of 30 to 80 psi. If the water pressure exceeds 80 psi, it is recommended that a water pressure regulator (not included) to be installed and reduce the water pressure to 50 psi. 2.
Page 8: Electrical Connections
ELECTRICAL CONNECTIONS: Make sure the power switch toggle (Fig.1 Item #14) is in the off (middle) position before connecting the power supply cord to prevent damage to the machine. Refer to Fig. 4. a. Connect the power supply cord into the proper power supply outlet as indicated on the electrical nameplate.
Page 9: Operating Instructions
OPERATING INSTRUCTIONS CAUTION: Read these instructions completely before operating this brewer. CAUTION: Make sure the installation instructions have been followed before attempting to operate this brewer. Incorrect installation or operating procedures will void the warranty and may cause damage to this appliance. Note: Make sure the tank has been filled with water before the power switch is turned ON.
Page 10 ADJUSTMENTS and PROGRAMMING YOUR Brewer : (See Fig. 7) (ALL MACHINES STARTING FROM SERIAL NO. 3432583 AND HIGHER) SETTING THE CLOCK: Fig. 7 1. Press and Hold the “PROGRAM” button for approximately 3 seconds to enter Program Mode. The colon (:) on the display will begin to flash and a beep is emitted by the brewer to confirm that it is has entered Program Mode.
Page 11 SETTING AUTOMATIC BREW TIME: (Note: The clock must be set in order to have “Brew Start Time” functioning.) Note: Once set, “Brew Start Time” is stored in the brewer’s internal memory and will be the default “Brew Start Time” unless changed or the unit is reset. 1.
Page 12 RE-SETTING AUTOMATIC BREW TIME: (FOR THE NEXT DAY) Note: The clock must be set in order to have “Brew Start Time” functioning. 1. Press and Hold the “PROGRAM” button for approximately 3 seconds to enter Program Mode. The colon (:) on the display will begin to flash and a beep is emitted by the brewer to confirm that it is has entered Program Mode.
Page 13: Maintenance And Cleaning
MAINTENANCE & CLEANING CAUTION: Only those persons trained and qualified in equipment repair should attempt to open and clean the inside of this appliance. CAUTION: Turn the power switch off, unplug the power supply cord and allow the brewing appliance to cool before cleaning. Note: Do not use abrasive or harsh cleaners as they may damage the finish of this coffee appliance.
Page 14: Troubleshooting
TROUBLESHOOTING SERVICE SHOULD BE PERFORMED BY QUALIFIED SERVICE PERSONNEL ONLY. WARNING: Turn off the "Power-Fill” toggle switch. Unplug the power supply cord and allow the coffee appliance to cool before servicing unless electrical testing is required. WARNING: Make sure installation instructions have been followed before attempting to test this appliance. Note: Allow the brewer appliance to heat up to brewing temperature BEFORE testing the temperature, water volume or the hi-limit thermostat.
Page 15 Symptom Possible Causes Remedies 10. Poor tasting coffee. Water deposits are plugging the spray head or Clean the spray head. See the Maintenance And Cleaning siphon tube. section. The brewing temperature has not been adjusted Adjust temperature . correctly. Change the amount of coffee being used. The amount of coffee being used may not be correct.
Page 16: Limited Warranty
LIMITED WARRANTY Manufacturer warrants this product to be free of defects in material and workmanship for a period of three (3) years from the original date of purchase. Within this warranty period, it will repair or replace, at its option, any part providing it's defective in material or workmanship.
Page 17 ACCESSORIES & CLEANING SUPPLIES: These accessories are available from Waterline for use on your Alwaysfreshh2o Built-In Beverage Center. For more information, please call Waterline at 1-800-522-3949 or e-mail us at waterline@alwaysfreshh2o.com Paper Coffee Filters – Waterline Part No. 6000415 (replacement) Ensure that your Built-In Brewer Appliance performs at It’s best by using these high-quality, commercial grade coffee filters.
Page 18 ACCESSORIES & CLEANING SUPPLIES: Brew Cone for System – Waterline Part No. AP-CONE (replacement) Stainless Steel Construction For use with Digital UCBS only (Model AP-UCBS-KIT) Quick Reference Guide for UCBS. – Waterline Part No. AP-GUIDE (replacement) Contains programming and settings information Store next to UCBS for quick reference Laminated, Double Sided Measures 8-1/2”...
Page 19 NOTES: Page 19...
Page 20 1-800-522-3949 www.alwaysfreshh2o.com...