User Maintenance Instructions - GE Max Profile Use And Care Manual

USER MAINTENANCE INSTRUCTIONS

Clean the control panel with a lightly dampened
cloth. Dry thoroughly. Do not use abrasive or
sharp objects on the panel. They can damage it.
The inside usually takes care of itself. If it should
ever need cleaning, use a mild cleansing powder.
Scouring pads and harsh cleaners can mar the
finish.
Alternatively, to remove stains inside the
PermaTuf® tub or, if you wish to refresh the inside
of your unit (including the water distribution
Not Using Your Dishwasher in Winter? Protect Against Freezing.
If your dishwasher is left in an unheated place
during the winter, ask a service technician to:
• Cut off electrical power to the dishwasher.
Remove fuses or trip circuit breaker.
• Turn off the water supply.
Care & Cleaning of the Dishwasher
Cleaning – Outside
The following are Options for Cleaning Stainless
Steel:
1. Use soap and water, rinse with clean water and
dry with a cotton cloth.
2. Use Stainless Steel Magic or a similar product. It
is available from your parts dealer. Be sure to
follow the manufacturers instructions.
10
CARE AND CLEANING
system), you may also use citric acid. Fill both
detergent cups completely with citric acid and run
dishwasher through a full cycle without any dishes.
You may repeat as often as you feel necessary.
Citric acid is widely available in powder form at
most drugstores across the country. Do not use
liquid bleach.
DO NOT USE LIQUID BLEACH
• Disconnect the water inlet line from the water
valve.
• Drain water from the inlet line and water valve.
(Use a pan to catch the water.)
• Reconnect the water inlet line to the water valve
3. Use a thick paste or baking soda and water. Rub
with a soft cloth.
4. Use a non-detergent based cleaner (eg. Formula
409 Glass and Surface cleaner).
Do not use steel wool, acids, abrasives, ammonia
or a commercial oven cleaner.
These instructions apply to Stainless Steel
surfaces, and could damage other surfaces.