Download Print this page

Safety Introduction - AOC V19 User Manual

Advertisement

The following subsections describe notational conventions used in this document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.
These blocks are notes, cautions, and warnings, and they are used as follows:
NOTE: A NOTE indicates important information that helps you make better use of your computer
system.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you
how to avoid the problem.
WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the
problem.Some warnings may appear in alternate formats and may be unaccompanied by an icon. In
such cases, the specific presentation of the warning is mandated by regulatory authority.
The monitor should be operated only from the type of power source indicated on the label. If
you are not sure of the type of power supplied to your home, consult your dealer or local power
company.
The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This
will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the
e-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance
ly. Do not defeat the safety purpose of the grounded plug.
Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will
ect the monitor from damage due to power surges.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
To ensure satisfactory operation, use the monitor only with UL listed computers which have
ropriate configured receptacles marked between 100 - 240V AC, Min. 5A
The wall socket shall be installed near the equipment and shall be easily accessible.
For use only with the attached power adapter (Output 12Vdc) which have UL,CSA listed license (Only
monitors with power adapter).
Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can
injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or
table recommended by the manufacturer or sold with this product. Follow the manufacturer's
instructions when installing the product and use mounting accessories recommended by the
manufacturer. A product and cart combination should be moved with care.
Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a
Do not place the front of the product on the floor.
Leave some space around the monitor as shown below. Otherwise, air-circulation may be
|
P a g e
٢

SAFETY INTRODUCTION

Hide quick links:

Advertisement

loading

This manual is also suitable for:

V19+