Page 1
AOC 9KLR AOC 9KLR 19 inch Color Monitor User’s Manual by Envision Peripherals, Inc. www.aocmonitor.com Before operating your monitor, please read this manual thoroughly. 9Klr v3_123102...
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. AOC 9KLR For Your Safety Notice 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Page 3
• Disconnect the power cord to stop the power supply to the monitor. AOC 9KLR For Your Safety • The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin.
250V, CEE-22. The other end must terminate with a molded-on type connector body, rated 10A, 250V, having standard CEE-22 female configuration. AOC 9KLR For Your Safety General Features: • 19" (48.3 cm) Color Monitor • Crisp, Clear Display for Windows •...
Before You Operate the Monitor AOC 9KLR Installing & Removing the Base AOC 9KLR v3_123102...
Page 6
3. Plug the other end of the power cord into a grounded AC outlet or UL-approved power strip. AOC 9KLR Caution: Make sure the power cord is the correct type that is required in your area. This monitor...
CEE-22 terminated connectors (see illustration above). AOC 9KLR Follow these steps: 1. Connect the built-in video cable into the 15-pin connector on the back of your computer and tighten the two screws.
An orange light indicates that the monitor is in Off mode. Note: This monitor automatically turns on when it is plugged into an AC outlet. AOC 9KLR Operating Instructions AOC 9KLR Power: Press this button to put the monitor into Off mode.
3. Press the Shuttle Knob again to open the function’s window. 4. Rotate the Shuttle Knob to change the settings of the function. AOC 9KLR Operating Instructions 5. To save and exit, select the exit function or leave the monitor alone for 10 seconds. If you want to adjust any other function, repeat steps 2-4.
EDID information. The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request EDID information over the DDC2B. AOC 9KLR Operating Instructions Windows INF Driver File Most computers will automatically configure your monitor to work with your computer.
Screen image is not centered or sized properly Picture has color defects (white doesn’t look white) AOC 9KLR Technical Support (FAQ) Possible Solution • Make sure the power cord is properly connected to a grounded power outlet and to the monitor.
Need help?
Do you have a question about the AOC 9KLR and is the answer not in the manual?
Questions and answers