Advertisement
● Setting white balance (5) - HVD-735NT/PT
Adjusts the balance of colors. Basically AUTO TRACKING
WHITE BALANCE is default setting. When this function
does not work properly, select other settings.
Settings
SW6
AUTO TRACKING
OFF
WHITE BALANCE
AUTO WHITE
OFF
BALANCE
MANUAL WHITE
OFF
BALANCE
WHITE BALANCE
OFF
LOCK
INDOOR SETTING
ON
(LIGHT 1)
INDOOR SETTING
ON
(LIGHT 2)
INDOOR SETTING
ON
(LIGHT 3)
OUTDOOR
ON
SETTING
● Setting monitor synchronization (6) - HVD-735NT/PT
(AC 24V adaptor users)
Vertical sync disturbance may occur when a selector is used to
switch between multiple cameras connected to one monitor.
To prevent vertical sync disturbance, adjust (6).
CAUTION
* When using the DC 12V adaptor, sync setting is set to internal sync.
* If MANUAL WHITE BALANCE is set, sync adjustment cannot
be performed. Change to a different white balance setting.
● Adjusting level volume (7)
If the entire image is too dark or bright, or the backlight compensation
is not correct even after (2) is set to "ON", you need to adjust the level
volume.
CCW (Low)
Closes the lens iris, making the entire image darker
CW(High)
Opens the lens iris, making the entire image drighter
Contents
SW7
SW8
ON
OFF
Normal setting
Automatically adjusts the
OFF
OFF
white balance when
objects are near
Fine-tune the white balance
manually. Adjust the color
using (6) button. (Left:Red,
Right:Blue). If an AC24V
adapter user sets MANUAL
OFF
ON
WHITE BALANCE, sync
adjustment cannot be
performed. To perform sync
adjustment, do it with button
(6) before setting MANUAL
WHITE BALANCE.
Adjust the white balance when
the brightness is constant.
After setting the switch at left,
ON
ON
keep pressing the white
balance lock button and
release it to set it.
When the room is lit by fluorescent
OFF
OFF
or incandescent lights (3200 ˚K)
When the room is lit by
OFF
ON
fluorescent lights (4200˚K)
When the room is lit by
ON
OFF
fluorescent lights (4700˚K)
ON
ON
Set for outside light (6500˚K)
● Adjusting gamma compensation (8)
- HVD-735NT/PT
For adjusting the gamma compensation, use this setting
to adjust the signal correction/contrast so that the image looks
natural.
Gamma is set to 0.6. Makes the gamma compensation
ON
stronger than with the normal setting.
OFF
Normal setting (gamma is set to 0.45)
● Setting the electronic shutter speed (9),(1)(2)(3)
- HVD-735NT/PT
The electronic shutter speed can be adjusted after setting
"ON" for this setting(9)
Changes the switch settings for (1),(2) and (3)
to change the electronic shutter speed.
ON
At this time the actual Flickerless and Backlight
Compensation are ignored.
OFF
Normal Setting
When the electronic shutter mode is set to "ON", a
combination of the following three settings can be used to
set up to eight speed levels.
Shutter
SW1
speed
flickerless (1)
1/60
OFF
1/100
ON
1/250
OFF
1/500
ON
1/1000
OFF
1/2000
ON
1/4000
OFF
1/10000
ON
● Setting Mirror Mode (10)
ON
Mirror Function is working
OFF
Mirror Function is not working
SW2
SW3
Backlight
Iris setting (3)
compensation (2)
ON
OFF
ON
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
ON
OFF
ON
OFF
ON
Office : 18F, Kukje Center Building 191
Hanganro-2ga Yongsan-gu
Seoul 140-702, Korea
Phone : 82-2-799-6109
Fax
: 82-2-749-6119
Http://www.honeywell.co.kr/cctv/english
Advertisement
