Silhouette DIM3225BLSST Owner's Use And Care Manual page 13

INNER WATER CONTAINER
CLEANING
WARNING
Please disconnect unit from power and make sure
no water is near the ice maker or floor board to
avoid electric shock and follow the steps below.
1. Ice maker machine cover board
2. Ice maker machine cover plate
3. Water container
4. Drain tube
Fig A.
1
2
1. Take out the cover board (1) of the ice maker machine (Fig.A)
2. Use the brush to clean all the parts, then use clean water to flush them.
3. After cleaning, install parts in reverse order.
4. To drain water from water container (3) dislodge drain tube.(4) (Fig.B)
CARE AND MAINTENANCE
NOTE:
• If the unit is unplugged, power lost, or turned off you
must wait 3 to 5 minutes before restarting the unit. If
you attempt to restart before this time delay, the Ice
Maker will not start.
Fig B.
11
3
4