Immediate Speech Connection - Ericsson Dialog 3210 User Manual

Other Useful Facilities
g
Access
* 6 1 *
z #
g {
Access
g
Automatic answer
52
Ongoing external call
When used to charge a call it is also possible to connect an
ongoing external call to an account code.
During the call:
Press the line key to put the ongoing call on hold
Press
Note: Finland and Norway press
Enter the account code and press
Dial tone.
Press the line key for the call put on hold

Immediate speech connection

On the Dialog 3211 and 3212 telephones calls are automatically
answered without lifting the handset or pressing any keys. The call
starts in handsfree mode.
On the Dialog 3210 telephone calls are automatically answered and
the caller can leave a message over the built-in loudspeaker. To
answer the call you have to lift the handset.
The function can be permanently active or activated by use of a
function key (programmed by system administrator).
Permanently active
Program the ringing option with "Immediate speech connection
with single tone burst", option 6, on the Access line key. See
section "Programming and
Activated on a function key
Press to order or cancel
Note: Function key pre-programmed by system
administrator.
The incoming call is signalled with a tone burst. When the key lamp
is lit you can use this function.
* 7 1 *
Adjustments" on page 72.
Dialog 3210, 3211 and 3212