Installing The Storage Box; Positioning The U-Shaped Firepot Cover And Angled Drip Pan; Hanging The Grease Bucket - Traeger BBQ 100 Owner's Manual

Installing The Storage Box:

Open the lid of the storage box and line-up the four nut zerts with the holes on the right
hand inside of the barbecue body. Put a washer on each of the 4 bolts needed and mount
them through the barbecue body into the nut zerts. Use a socket wrench or crescent
wrench to tighten the bolts. Do not over tighten them.

Positioning The U-Shaped Firepot Cover And Angled Drip Pan:

Short End
Angled drip pan
Drip Pan
Support Bar
Take time to become familiar with each of the various components and where they go
inside your barbecue.

Hanging The Grease Bucket:

Locate the grease drain tube coming out of the bottom of the right end of the barbecue
unit. Hang the grease bucket on the drain tube hook.
Firepot cover
support
bracket
Auger tube
Angled drip pan
U-shaped
Firepot
firepot cover
Long End
Angled drip pan
V channel
grease catch
Grease
drain tube