Setting Up Your Phone; Configure Area Codes (North America) - Fortinet FON-600 User Manual

Setting up your phone

1. Press the
phone. The menu screen will be displayed.
2. You can use the  button or the  button to
move the selection indicator up or down, and
press the
Alternatively, you can just press a digit to select
the corresponding option.
3. If you made a mistake during telephone set up procedures, press the
screen will be displayed.

Configure area codes (North America)

If you enter your local area codes, caller ID number
can be dialed correctly in North America. If you dial
your local calls using 7 digits (e.g., 555-1212), you
need to enter your area code for 7-digit dialing.
Otherwise, enter up to 3 area codes for 10-digit local
dialing. To enter area codes:
1. Press the
2. If you dial your local calls using 7 digits (e.g., 555-1212), press A to
enter your local area code.
3. If you dial your local calls using 10 digits (e.g., 303-555-1212), press
S to enter up to 3 area codes for 10-digit dialing.
4. If you use this phone in an area where the caller's number can be
dialed without modification, do not enter any area code. Caller's
number will be dialed as it is received. If you enter an area code by
mistake, use the  button to delete an area code.
5. If you enter any area code, caller's number will be displayed with the
North American format (613-725-2980). If you don't enter any area
code, caller's number will be displayed as it is received (6137252980).
Setting up your phone
MENU
DIAL/ENTER
GOODBYE button. Set up procedure is terminated and the idle state
MENU
button to configure the
button to select an option.
button followed by A.
Page 5
MENU
Use / Enter to Select
1 = Enter area codes
2 = Enter access code
3 = Select ring tone
4 = Select flash duration
MENU
Use / Enter to Select
1 = 7-digit dialing
2 = 10-digit dialing
FON-600 Telephone User Guide