Warranty - Performax 241-0988 Operating Manual

work on any fiberglass material, wallboard, spackling compound, or
plaster. During any use on these materials, it is extremely important that
the tool is cleaned frequently by blowing with an air jet.
Use a soft, clean and damp cloth to wipe the tool housing. A mild detergent
can be used but nothing like alcohol, petrol or other cleaning agent. Never
use caustic agents to clean plastic parts.
WARNING! Always wear safety goggles or safety glasses with side shields
during power tool operations or when blowing dust. If operation is dusty, also
wear a dust mask.
WARNING! When changing a blade immediately after operation, allow the
blade to cool before removing it to avoid possible burning.
NOTE: Avoid using solvents when cleaning plastic parts. Most plastics are sus-
ceptible to damage from various types of commercial solvents and may be
damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.

WARRANTY

If, during normal use, this PERFORMAX
defect in material or workmanship within two years from the date of original
purchase, simply bring this tool and its sales receipt back to your nearest
Menards retail store for a free equivalent replacement within those two
®
years.
The warranty:
(1) excludes expendable parts including but not limited to blades, bits, light
bulbs, and/or batteries;
(2) shall be void if this tool is used for commercial or/and rental purposes; and
(3) does not cover any losses, injuries to persons/properties, or costs. This
warranty does give you specific legal rights and you may have other rights,
which vary from state to state.
*SAVE YOUR RECEIPTS. Your warranty is void without them. For help, please
call to our customer center, toll free number: 1-866-858-2664.
power tool breaks or fails due to a
TM
15