Performax 241-0988 Operating Manual page 11

PIVOT SHOE
Slide the Shoe In or Out
The pivot shoe adjusts towards the back
and the front of the saw to expose different
areas of teeth over the full length of the
blade or for special applications that
require a low clearance.
1. Disconnect the saw from the power
supply.
2. Use the hex key (included) to loosen the 2 screws on bottom of saw housing
(Fig. 4).
3. Adjust pivot shoe towards the back
or the front of the saw, to the desired
position, and retighten both screws.
Pivoting the Shoe (Fig. 5)
The shoe pivots in order to provide
maximum control against the surface
being cut.
Fig. 4
Fig. 5
11