Generac Power Systems 8kW Owner's Manual page 34

Problem
Unit will not start in AUTO with utility
loss.
Unit will not start in AUTO with utility
loss.
Unit will not start in AUTO with utility
loss.
Yellow LED illuminated in any state.
Yellow LED illuminated in any state.
Yellow LED illuminated in any state.
Yellow LED illuminated in any state.
Yellow LED illuminated in any state.
Yellow LED illuminated in any state.
30
Things to
LED
Check
Check the
RED LEDs/Screen
for alarms.
Check the
RED LEDs/Screen
for alarms.
Check the
RED LEDs/Screen
for alarms.
Check screen
YELLOW
for additional
information.
Check screen
YELLOW for additional
information.
Check screen
YELLOW
for additional
information.
Check screen
YELLOW for additional
information.
Check screen
YELLOW for additional
information.
Check screen
YELLOW for additional
information.
Active Alarm
STEPPER
Contact servicing dealer.
OVERCURRENT
MISWIRE Contact servicing dealer.
OVERVOLTAGE Contact servicing dealer.
Clear alarm. From the MAIN menu on
the control panel, navigate to the BAT-
LOW BATTERY TERY MENU. Contact servicing dealer if
battery is GOOD. Replace battery If
CHECK BATTERY is displayed.
BATTERY
Contact servicing dealer.
PROBLEM
CHARGER
Contact servicing dealer
WARNING
Perform SERVICE A maintenance;
SERVICE A
press ENTER to clear.
Perform SERVICE B maintenance;
SERVICE B
press ENTER to clear.
Inspect Battery Inspect battery; press ENTER to clear.
Automatic Standby Generator Owner's Manual
Solution