Table of Contents
Advertisement
Setup Menu Options
Audio Setup Page
Speakers Volume
Speakers Delay
HDMI Audio
38
(continued)
(underlined options are the factory default settings)
Access the speaker's level setup menu. Use
the volume level for each connected speaker between -6dB to
+6dB. See 'Getting Started - Setting the speakers' channels'
for details.
Access the speaker's distance setup menu. Use
the delay times for the center and rear speakers based on the
listening position and distance. See 'Getting Started - Setting
the speakers' channels' for details.
Note: 1 ms increase/decrease of delay time is equivalent to one (1) foot
change in distance. Use the longer delay time settings when the rear
speakers are closer to the listener than the front speakers.
This setting is only required if you are using the HDMI OUT
jack to connect your TV or other display device (see
'Option 4: Connecting to a HDMI-compatible TV'.)
{ Off }
– Turn off the HDMI audio output. You
can still enjoy the sound output through
the speaker system.
{ All }
– The HDMI audio output will be same as
the audio stream being played back. In
the case when the playback audio format
is not supported, the audio output will be
changed to PCM (Pulse Code Modulation)
automatically.
{ PCM only } – Downmix the audio signals to linear-PCM
(2-channel.)
Notes:
– It may take a while for this unit and the input device to communicate
and initialize.
– It is not possible to listen to SACDs or copy-controlled DVD-Audio
CPPM (Content Protection for Playable Media) sources using the HDMI
connection.
keys to adjust
keys to set
Advertisement
Table of Contents
