Sync Audio Output With Video Play - Philips HTS6515D/37B User Manual

Access DVD menu
1
Press DISC to access disc main menu.
2
Select a play option, then press OK.
• In some menus, press number buttons
to input your selection.
• To return to the title menu during
playback, press TITLE.
Access VCD menu
The PBC (Playback Control) for VCD is turned
on by default in the factory. When you load in
a VCD, the contents menu is displayed.
1
Press vV to select a play option, then
press OK to start play.
• If PBC is off, it skips the menu and starts
play from the fi rst title.
• During playback, you can press BACK
to return to the menu (if the PBC
mode is on.)
Tips
•
The default setting for PBC is on. To change the
default setting, see chapter 'Adjust settings' -
[ Preference Setup ] > [ PBC ] for details.
28 EN

Sync audio output with video play

If the video play is slower than the audio output
(sound does not match with the pictures,) you
can delay the audio output to match the video.
1
Press and hold AUDIO SYNC until
'AUDIO SYNC XXX' is displayed.
• 'XXX' denotes the delay time.
2
Within fi ve seconds, press VOL +- to
set the delay time for audio output.
Note
•
If the volume control is not used within 5 seconds, it
resumes normal volume control function.