Table of Contents
Advertisement
Access VCD menu or preview menu
The PBC (Playback Control) for VCD is
activated by default in the factory. When you
load a VCD, the contents menu is displayed.
1
Press
to select a play option, then
press OK to start play.
•
If PBC is off, it skips the menu and
starts play from the fi rst title.
•
To return to the menu during play,
press
-
PBC mode is on).
2
Press
to preview the contents of the
disc.
•
To exit the menu, press
Select Digest Type:
Track Digest
Disc Interval
Track Interval
3
Select a preview play option, then press
OK
[Track Digest]
Plays the fi rst few seconds of each track in a
disc.
[Disc Interval]
Divides the total disc time by six and play the
fi rst few seconds of these intervals.
[Track Interval]
Divides the current track by six and play the
fi rst few seconds of these intervals.
This option is not available in stop mode.
Tip
•
You can change the PBC setting (see 'Adjust settings'
> 'Preferences' > [PBC] ).
EN
26
(only possible if the
.
Sync audio output with video play
If the video play is slower than the audio
output (sound does not match with the
pictures), you can delay the audio output to
match the video.
1
Press and hold
SYNC' is displayed.
2
Within fi ve seconds, press
the delay time for audio output.
Note
•
If the volume control is not used within fi ve seconds,
it resumes normal volume control function.
Quick skip play to a specifi c time
1
During play, press
The disc status menu is displayed.
»
2
Press
to view information, then press
OK .
•
[TT Time] (title time)
[Ch Time] (chapter time)
•
[Disc Time] (disc time)
•
[Track Time] (track time)
•
3
Press the Numeric buttons to enter the
time where you want to skip to, then
press OK .
Note
•
The options are different depending on the disc type.
until 'AUDIO
to set
-
.
Advertisement
Table of Contents
