Table of Contents
Advertisement
User Manual of AAR-W450K and AAR-W850K Series DVR
7.1 Setting Motion Detection
Steps:
1. Enter Motion Detection interface and choose a camera you want to set motion detection.
Menu> Camera> Motion
2. Set motion detection area and sensitivity.
1)
Check the checkbox of Enable Motion Detection to enable motion detection, use the mouse to
draw detection area(s) and drag the sensitivity bar to set sensitivity.
2)
Click the
icon of Handling to set alarm response actions.
3. Click Trigger Channel tab and select one or more channels which will start to record or become
full-screen monitoring when motion alarm is triggered.
Figure 7.3 Set Trigger Camera of Motion Detection
Figure 7.1 Motion Detection Setup Interface
Figure 7.2 Set Detection Area and Sensitivity
84
Advertisement
Table of Contents
