Table of Contents
Advertisement
User Manual of AAR-W450K and AAR-W850K Series DVR
9.3 Checking HDD Status
Purpose:
You may check the status of the installed HDD on device so as to take immediate check and maintenance in case
of HDD failure.
Checking HDD Status in HDD Information Interface
Steps:
1.
Enter the HDD Information interface.
Menu > HDD>General
2.
Check the status of each HDD which is displayed on the list.
Note:
If the status of HDD is Normal or Sleeping, it works normally. If the status is Uninitialized or Abnormal,
please initialize the HDD before use. And if the HDD initialization is failed, please replace it with a new one.
Checking HDD Status in HDD Information Interface
Steps:
1.
Enter the System Information interface.
Menu > Maintenance > System Info
2.
Click the HDD tab to view the status of HDD displayed on the list.
Figure 9.8 View HDD Status (1)
Figure 9.9 View HDD Status (2)
111
Advertisement
Table of Contents
