Vision IMC-922 User Manual page 9

HD-SDI camera user manual
MOTION
PRIVACY
LANGUAGE
DEFECT
RS485
VERSION
SHARPNESS
8. ADJUST
MONITOR
M e g a p i x e l B o x C a m e r a
DIS
SELECT AREA1~AERA4
DISPLAY
SENSITIVITY
MOTION VIEW
DEFAULT
SELECT AREA1~AERA8
DISPLAY
COLOR
TRANS
DEFAULT
ENG,JPN,CHN1,CHN2, KOR, GER, FRA, ITA, SPA, POL, RUS, POR, NED, TUR, HEB,
ARB
LIVE DPC
Select the dead pixel compensation mode in static points (ON/OFF)
START
STATIC DPC
LEVEL
SENS-UP
START
LEVEL
BLACK DPC
DIFF.TH
CAM ID
ID DISPLAY
BAUDRATE
LEVEL 0-15
BLACK LEVEL Adjust the brightness (-30~+30)
BLUE GAIN
CRT
RED GAIN
LCD GAMMA
Select the area
Select the area, size and position (ON/OFF)
Select the sensitivity of motion recognition. (0~100)
Display masks on the motion detected area (ON/OFF)
Motion Factory reset
Select the privacy area on the screen
Select the color , size and position (ON/OFF)
Select the color of privacy mask
Privacy Factory reset
Select the dead pixel compensation mode in real time
(AUTO/OFF)
Start the dead pixel compensation
Select the level of STATIC DPC (0~60)
Adjust the sense up value to find dead pixels (x2~x30)
Start the dead pixel compensation
Select the level of BLACK DPC (0~255)
Adjust the different threshold value to find dead pixels
(0~255)
Select the number of camera (0~255)
Select the display of CAM ID (ON/OFF)
Select the baud rate (2400~38400)
Display the Firmware Version
Adjust the level of sharpness
Adjust the blue gain (-30-+30)
Adjust the red gain (-30-+30)
Select the gamma value
Page 9