Warranty - Vision IMC-922 User Manual

HD-SDI camera user manual
Page 3
- For prolong life and the protection of the camera's CCD, do not point the camera directly at the sun
or a strong spotlight which may result in CCD blooming and permanent damage.
- DO NOT operate the camera beyond the operation temperature range stated and AVOID usage in
conditions exceeding 90% humidity.
- DO NOT use an unregulated power supply source to prevent damage to the camera's circuits.
- Use soft materials such as lens tissue or cotton tipped applicator with ethanol for CCD faceplate
cleaning ONLY when necessary and AVOID contact with fingers or any hard object. Do not use solvent,
abrasives or detergent when cleaning the camera body.
- Warranty shall be voided for improper use of the camera caused by the user; or damage caused by
other equipment due to negligence.

Warranty

We warrant the original components free of defects for one year from the purchase date.
This warranty covers failures and damage due to defect, which may occur during normal use. It does
not cover damages or failure resulting from mishandling, abuse, misuse or modification. An RMA
number must be obtained in advance for every repair or replacement.
Copyright
All the materials in this document are protected by copyright and other laws for intellectual property.
They are not allowed to be copied, reproduced or modified for any use without permission.
We reserves the right to make changes in specifications, functions or designs at any time
and without any notice. The company names in this document may be the trademarks and trade-
names of their respective owner; and are hereby acknowledged.
Copyright © 2012 All rights reserved.
M e g a p i x e l B o x C a m e r a